PassMark BurnInTest Pro 8.0 Build 1041 (25.4 Mb)

မဂၤလာပါ ကြန္ျပဴတာတလံုးမွာရွိေနတဲ့ Hardwares မ်ား CPU,RAM,CD-ROMs,CD burners, DVDs, sound cards, 2D graphics, 3D graphics,network connection, printers, video playback စသည္တို႔ရဲ့အေျခအေနနဲ႔ျပႆနာမ်ားကို Test လုပ္နိုင္တဲ့ေဆာ့ဝဲေလးတခုျဖစ္ပါတယ္။ျပႆနာမ်ား

ကို Troubleshooting and diagnostics လုပ္နိုင္တဲ့အတြက္ လိုအပ္တဲ့ေဘာ္ေဘာ္ေတြေဆာင္ထားနိုင္

ပါတယ္.......

PassMark BurnInTest is the computer stability and reliability testing software

for Windows and Linux. It is a software tool that heavily loads all the major

subsystems of a computer with the aim of thoroughly exercising the hardware

in a PC in a short period of time. The software tests the CPU, hard drives,

RAM, CD-ROMs, CD burners, DVDs, sound cards, 2D graphics, 3D graphics,

network connection, printers, video playback. If you have specialized hardware

that BurnInTest does not test, you can even write your own test and integrate

it with BurnInTest. PassMark has produced plugin tests for Keyboards, Dial up

Modems and FireWire ports. This can all be done simultaneously as the

application is multithreaded.

PassMark BurnInTest will bring intermittent or hidden problems to the surface

so that after a successfully run the computer can be used with a much higher

level of confidence. BurnInTest can also be used by overclockers to verify

system stability at high clock speeds.

PassMark BurnInTest is a software tool that allows all the major sub-systems of

a computer to be simultaneously stress tested for endurance, reliability and

stability. The Professional version also has a number of additional features

such as tape drive testing, USB port testing, USB 2.0 port testing, Serial and

parallel port testing with the use of loop back plugs.

- Assists in PC Troubleshooting and diagnostics.

- The best value professional burn-in tool on the market!

- The hottest, fastest CPU Burn In tool around!

  (See our CPU Heat Generation benchmark testing)

- Avoid delivering D.O.A. (Dead on Arrival) hardware to your customers.

- Dramatically reduce your burn in times with multithreaded simultaneous

  testing of components.

- Build your image as a supplier of quality systems.

- Avoid costly downtime, system rebuilds and lost data.

- Test the stability of a system after configuration changes or hardware

  upgrades (critical for overclocking).

What BurnInTest does is thoroughly exercise the hardware in a PC in a short

period of time, in the same way as normal applications use a PC over a long

period of time. This takes advantage of the fact that computer hardware tends

to fail either very early in its life or after many thousands of hours of use.

Typically BurnInTest should be used before a PC is put into service, as the

failure of a computer that isn’t being used for a critical application and doesn’t

have any critical data is much less damaging, (especially if it is still under

warranty).

Version 8.0 build 1041, 27/April/2015

- The disk test has been optimized to run faster, especially for disks

  that are faster than about 800MB/s.

- The physical disk test may report "Unable to unmount volume"

  if partition information is found on the disk, but no volume is

  mounted. This has been corrected.

- Corrected a possible crash bug with the Butterfly seek disk test if

  BurnInTest is unable to get the disk volume information.

- Reduced the time taken to collect System information.

- Corrected a possible crash bug if BurnInTest was started before

  the disk system information was collected.

- Updated CPU system information: Added Intel Cherry Trail, Braswell

  and Knights Landing. Added Intel Bay trail temperature monitoring.

  Intel Core 2 Duo E6000 and E4000 temperature monitoring updates.

  Added newer Intel Haswell and Broadwell CPU system information.

  Added newer AMD CPU system information.

- Improvements to memory information collection for SPD decode of

  DDR2 ECC, the Intel 5100 chipset, Intel Wildcat Point PCH and

  decoding of DDR3 rev1.1 timings.

Install notes:

- Install the program, run

- Wait until the window opens automatically activate

- In the "Username and Key" paste the entire contents of the file

  "License key.txt"

- Click on the "Continue", after a while, a confirmation window

  appears, click on "OK"

DOWNLOAD HERE ( mega )

DOWNLOAD HERE ( solidfiles )

ခုလိုအားေပးတဲ့အတြက္ အထူးေက်းဇဴးတင္ပါေၾကာင္း ေျပာၾကားပါရေစ..ေမာင္ေစတနာ မွ နည္းပညာမ်ားအား မည္သူမဆို လြတ္လပ္စြာ ကူးယူသုံးစြဲနိဳင္ပါတယ္.က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္ ဒီမွာ Like ႏွိပ္ပါ။ မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။ ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။